LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2024 >> Terrain SLT, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Automatic Transmission - 6T40 (MNH) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Manual Shift Shaft and Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2024 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery tray. Refer to Battery Tray Replacement .
  2. Remove the manual shaft and position switch assembly. Refer to Manual Shift Detent Lever with Shaft Position Switch Assembly Replacement .
  3. GM2079285Courtesy of GENERAL MOTORS COMPANY

    Remove the manual shaft seal (1) using DT-45201  remover.

scientia non olet · About LEMON Manuals