Removal Procedure
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (KL9)
- Remove the tire and wheel assembly. Tire and Wheel Removal and Installation
Front Brake Pipe Nut (1) - Remove
Front Brake Hose Retainer (1) - Remove
Front Brake Hose Fitting Bolt (1) - Remove
Front Brake Hose Bolt (1) - Remove
Front Brake Hose Washer (2) - Remove and DISCARD [2x]
- Plug the front brake caliper inlet to prevent brake fluid loss and contamination.
Front Brake Hose (1) - Remove