LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2024 >> Terrain SLT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel Trim And Console Trim >> Repair Instructions >> Instrument Panel Knee Bolster Replacement (Equinox) >> Removal Procedure

Removal Procedure

  1. GM4562240Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Knee Bolster Bolt (1) - Remove [3x]

  2. Push down on hood handle (2) to release, then slide out of the knee bolster.
  3. GM4562241Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Knee Bolster (1) - Remove

  4. Use a flat bladed plastic trim tool.
  5. Disconnect the electrical connector.
  6. Transfer components as necessary.
scientia non olet · About LEMON Manuals