Pinion Shaft Seal: Remove & Replace
WARNING: This page is about the Sierra 2500 HD AT4, 6.6L Eng VIN 7, which is a different variant/trim than selected.
CARRIER TYPE
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| AT4,Denali,Denali Ultimate,Pro,SLE,SLT,4WD, Front Axle | 1.2 | 0.8 | B | |
| Additional Procedure: PINION SHAFT SEAL: Remove & Replace: | ||||
| 4WD, Where Skid Plate interferes add | 0.2 | B | ||
| Combination Procedure: SPACER CRUSH SLEEVE: Replace: | ||||
| 4WD, Front Axle | 4.1 | B | ||