Removal Procedure
Front Trim Finish Compartment (2) - Remove - Front Trim Finish Compartment Removal and Installation
Front Stowage Compartment Latch Actuator Cable (1) - Remove [2x]
- Hood Primary and Secondary Latch Release Cable (2) - Remove
Mark the location of the hood primary and secondary latch before removing the bolts with a grease pencil.
- Hood Primary and Secondary Latch Bolt (1) - Remove [2x]
- Hood Primary and Secondary Latch (2) - Remove
- Disconnect the electrical connector and release the wiring harness retainers as necessary.