Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Using a flat bladed plastic trim tool, release the retaining clips.
Instrument Panel Outer Trim Cover (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Fuse Block Access Hole Cover (1) - Remove
Instrument Panel Knee Bolster Bolt (2) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Using a flat bladed plastic trim tool, release the retaining clips.
Reposition the component to access the electrical connectors.
Disconnect the electrical connectors.
Instrument Panel Knee Bolster (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Carrier Bolt (1) - Remove [6x]
Instrument Panel Outer Air Outlet Bolt (2) - Remove
Instrument Panel Trim Pad Bolt (3) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Knee Bolster Deflector Bolt (1) - Remove [4x]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity. Reposition the instrument panel carrier to access the instrument panel knee bolster deflector.

Instrument Panel Knee Bolster Deflector (1) - Remove