Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Instrument Panel Knee Bolster Deflector (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Instrument Panel Knee Bolster Deflector Bolt (1) - Install and tighten [4x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Carrier Bolt (1) - Install and tighten [6x] - Fastener Specifications
Instrument Panel Outer Air Outlet Bolt (2) - Install and tighten - Fastener Specifications
Instrument Panel Trim Pad Bolt (3) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connectors.
Instrument Panel Knee Bolster (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Knee Bolster Bolt (2) - Install and tighten [2x] - Fastener Specifications
Instrument Panel Fuse Block Access Hole Cover (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Outer Trim Cover (1) - Install