Removal Procedure
Remove the left and right front floor mat (1).
Using a suitable plastic trim tool, release the retaining tabs.
- Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Remove
- Front Floor Console Extension Bolt (2) - Remove
- NOTE:
Some components not shown for graphic clarity.
Move the front seat to access the retainers.
- Using a flat bladed plastic trim tool, release the retaining clips.
- Front Floor Console Extension Panel - Left Side (1) - Remove
- NOTE:
Some components not shown for graphic clarity.
Using a flat bladed plastic trim tool, release the retaining clips.
- Front Floor Console Lower Applique - Left Side (1) - Remove
- NOTE:
Some components not shown for graphic clarity.
Rear Floor Mat (1) - Remove
- NOTE:
Some components not shown for graphic clarity.
Move the front seat to access the retainers.
- Using a suitable plastic trim tool, release the retaining tabs.
- Front Floor Console Bolt Access Hole Cover - Left Side (1) - Remove
- Front Floor Console Retainer Bolt (2) - Remove [5x]
- NOTE:
Some components not shown for graphic clarity.
Move the front seat to access the retainers.
- Using a flat bladed plastic trim tool, release the retaining clips.
- Front Floor Console Extension Panel - Right Side (1) - Remove
- NOTE:
Some components not shown for graphic clarity.
Using a flat bladed plastic trim tool, release the retaining clips.
- Front Floor Console Lower Applique - Right Side (1) - Remove
- NOTE:
Some components not shown for graphic clarity.
Move the front seat to access the retainers.
- Using a suitable plastic trim tool, release the retaining tabs.
- Front Floor Console Bolt Access Hole Cover - Right Side (1) - Remove
- Front Floor Console Retainer Bolt (2) - Remove [5x]
- NOTE:
Some components not shown for graphic clarity.
Disconnect and reposition harness as necessary.
- With the aid of an assistant, remove the front floor console (1) from the vehicle.