Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Low Frequency Console Number 2 Antenna (1) - Install
Secure the retaining tab.
Courtesy of GENERAL MOTORS COMPANY

Accessory Power Receptacle (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Rear Air Outlet (1) - Install [2x]
Secure the retaining tabs.
Courtesy of GENERAL MOTORS COMPANY

Heater and Air Conditioning Auxiliary Control (2) - Install

CAUTION:

Heater and Air Conditioning Auxiliary Control Bolt (1) - Install and tighten [4x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Dual Charge Only Receptacle (1) - Install
Secure the retaining tabs.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Connect the electrical connectors.
Front Floor Console Rear Trim Panel (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Rear Cover Bolt (2) - Install and tighten [2x] - Fastener Specifications
Front Floor Console Rear Trim Plate (1) - Install
Close the armrest cover.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Front Floor Console Rear Cover Bolt (2) - Install and tighten - Fastener Specifications
Front Floor Console Bolt Access Hole Cover - Right Side (1) - Install
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Front Floor Console Rear Cover Bolt (2) - Install and tighten - Fastener Specifications
Front Floor Console Bolt Access Hole Cover - Left Side (1) - Install
Return the seat to its original position.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Rear Floor Mat (1) - Install