Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Front Floor Console (1) - Remove - Front Floor Console Removal and Installation (GQH / GQI / GQO) , or Front Floor Console Removal and Installation (GQ2 / GQB / GQC)
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Rear Cover Bolt - Left Side and Right Side (1) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Open the armrest cover.
Release the retainers with a suitable plastic trim tool.
Front Floor Console Rear Trim Plate (1) - Remove
Front Floor Console Rear Cover Bolt (2) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Release the retainers with a suitable plastic trim tool.
Reposition the component to access the electrical connectors.
Disconnect the electrical connectors.
Front Floor Console Rear Trim Panel (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat bladed plastic trim tool, release the retaining clips.
Front Floor Rear Console Side Trim Panel - Left Side and Right Side (1) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Remove the front floor console rear air duct harness retainer.
Front Floor Console Rear Air Duct Bolt (1) - Remove [3x]
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Rear Air Rear Duct (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Compartment Divider (1) - Remove
Front Floor Console Compartment Liner (2) - Remove
Front Floor Console Intermediate Bracket Bolt (3) - Remove [4x]
Unclip the front floor console wiring harness and reposition away from the front floor console intermediate bracket.
Front Floor Console Intermediate Bracket (4) - Remove