Installation Procedure
Front Floor Console Cup Holder (2) - Install
- Front Floor Console Bolt (1) - Install and tighten [4x] - Fastener Specifications
Low Frequency Console Antenna (2) - Install
- Theft Deterrent Module Bolt (1) - Install and tighten [2x] - Fastener Specifications
Connect the electrical connectors.
- Front Floor Console Cup Holder Trim Plate (1) - Install
- NOTE:
Some components not shown for graphic clarity.
Front Floor Console (1) - Install
- Connect the electrical connectors to the front floor console (1).
- NOTE:
Some components not shown for graphic clarity.
Front Floor Console Retainer Bolt (2) - Install and tighten [5x] - Fastener Specifications
- Front Floor Console Bolt Access Hole Cover - Right Side (1) - Install
- NOTE:
Some components not shown for graphic clarity.
Front Floor Console Lower Applique - Right Side (1) - Install
- NOTE:
Some components not shown for graphic clarity.
Front Floor Console Extension Panel - Right Side (1) - Install
- NOTE:
Some components not shown for graphic clarity.
Front Floor Console Retainer Bolt (2) - Install and tighten [5x] - Fastener Specifications
- Front Floor Console Bolt Access Hole Cover - Left Side (1) - Install
- NOTE:
Some components not shown for graphic clarity.
Rear Floor Mat (1) - Install
- NOTE:
Some components not shown for graphic clarity.
Front Floor Console Lower Applique - Left Side (1) - Install
- NOTE:
Some components not shown for graphic clarity.
Front Floor Console Extension Panel - Left Side (1) - Install
Front Floor Console Extension Bolt (2) - Install and tighten - Fastener Specifications
- Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Install
Install the left and right front floor mat (1).
- Return the seat to its original position.
Refer to Fastener Caution .