Removal Procedure
- NOTE:
Some components not shown for graphic clarity.
Rear Floor Mat (1) - Remove
- NOTE:
Some components not shown for graphic clarity.
Move the front seat to access the retainers.
- Using a suitable plastic trim tool, release the retaining tabs.
- Front Floor Console Bolt Access Hole Cover - Left Side (1) - Remove
- Front Floor Console Rear Cover Bolt (2) - Remove
- NOTE:
Some components not shown for graphic clarity.
Move the front seat to access the retainers.
- Using a suitable plastic trim tool, release the retaining tabs.
- Front Floor Console Bolt Access Hole Cover - Right Side (1) - Remove
- Front Floor Console Rear Cover Bolt (2) - Remove
Open the armrest cover.
- Release the retainers with a suitable plastic trim tool.
- Front Floor Console Rear Trim Plate (1) - Remove
- Front Floor Console Rear Cover Bolt (2) - Remove [2x]
- NOTE:
Some components not shown for graphic clarity.
Release the retainers with a suitable plastic trim tool.
- Reposition the component to access the electrical connectors.
- Disconnect the electrical connectors.
- Front Floor Console Rear Trim Panel (1) - Remove
- NOTE:
Some components not shown for graphic clarity.
Using a flat bladed plastic trim tool, release the retaining clips.
- Front Floor Rear Console Side Trim Panel - Left Side (1) - Reposition
Front Floor Console Armrest Nut (1) - Remove
- Front Floor Console Armrest Bolt (2) - Remove
- Front Floor Console Armrest Dampener - Left Side (3) - Remove
- NOTE:
Some components not shown for graphic clarity.
Using a flat bladed plastic trim tool, release the retaining clips.
- Front Floor Rear Console Side Trim Panel - Right Side (1) - Reposition
- NOTE:
Some components not shown for graphic clarity.
Front Floor Console Armrest Bolt (1) - Remove
- Front Floor Console Armrest Nut (2) - Remove
- Front Floor Console Armrest Dampener - Right Side (3) - Remove
Front Floor Console Armrest (1) - Remove