5-7 Reverse Clutch Applies

5-7 Reverse Solenoid E 

The 5-7 reverse solenoid E energizes applying pressure against the 5-7 reverse regulator valve spring force. This allows DRIVE 2 fluid to enter the 57R CLUTCH FEED fluid circuit. 57R CLUTCH FEED fluid is routed thru orifice #45 into the 57R CLUTCH fluid circuit to the 5-7 reverse clutch assembly.

5-7 Reverse Clutch Assembly 

57R CLUTCH fluid is directed into the 5-7 rev clutch piston spring force which applies holding force to the 5-7 rev clutch plates.