LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2024 >> Acadia AT4 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Diagnostic Information and Procedures >> DTC C05C2: >> Circuit / System Verification

Circuit / System Verification

  1. Ignition / Vehicle - Off
  2. Brake Pressure Modulator Valve = Ambient Air Temperature
  3. Ignition - On / Vehicle - In Service Mode
  4. Under normal operating conditions: Verify DTC C05C2 is not set
    • If the DTC sets 

      Replace the component: K160 Brake System Control Module

    • Go to next step: If the DTC is not set 
  5. All OK.
scientia non olet · About LEMON Manuals