Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Intake Air Splash Shield Retainer (1) - Remove [12x]
Intake Air Splash Shield (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Hood Secondary Latch Release Cable (3) @ Hood Primary and Secondary Latch (2) - Disconnect
Release the hood secondary latch release cable (3) from the retainer.
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connector and release the wiring harness retainers as necessary. (1)
Hood Primary and Secondary Latch Bolt (2) - Remove [2x]
Hood Primary and Secondary Latch (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Hood Primary Latch Release Cable (1) @ Hood Primary and Secondary Latch (2) - Disconnect
Release the hood primary latch release cable (1) from the retainer.