Removal Procedure
- Front Floor Console (1) - Remove - Front Floor Console Removal and Installation
Radio Front Center Speaker Grille (1) - Remove
Radio Front Center Speaker Bolt (1) - Remove [2x]
- Disconnect the electrical connector.
- Radio Front Center Speaker (2) - Remove
Instrument Panel Upper Trim Pad Bolt (1) - Remove [5x]
- Using a flat - bladed plastic trim tool, release the retaining clips.
- { If equipped }, Disconnect the electrical connector.
- Instrument Panel Instrument Cluster Hood (2) - Remove
Radio Control Bolt (1) - Remove [4x]
- Disconnect the electrical connector.
- Radio Control (2) - Remove
Instrument Panel Upper Trim Panel Bolt (1) - Remove [10x]
- Using a flat - bladed plastic trim tool, release the retaining clips.
- Instrument Panel Upper Trim Panel Bracket (2) - Remove
Instrument Cluster Bolt (1) - Remove [2x]
- Release the clips with a suitable tool.
- Disconnect the electrical connector.
- Instrument Panel Cluster Control Module (2) - Remove