Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connectors.
Instrument Panel Trim Plate Applique - Right Side (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Center Trim Pad (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Upper Trim Panel Bracket (2) - Install

CAUTION:

Instrument Panel Upper Trim Panel Bolt (1) - Install and tighten [10x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector.
Radio Control (2) - Install
Radio Control Bolt (1) - Install and tighten [4x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console (1) - Install - Front Floor Console Removal and Installation
Courtesy of GENERAL MOTORS COMPANY

{ If equipped } Connect the electrical connector.
Instrument Panel Instrument Cluster Hood (2) - Install
Instrument Panel Upper Trim Pad Bolt (1) - Install and tighten [5x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector.
Radio Front Center Speaker (2) - Install
Radio Front Center Speaker Bolt (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Radio Front Center Speaker Grille (1) - Install