Removal Procedure
Radio Front Center Speaker Grille (1) - Remove
Radio Front Center Speaker Bolt (1) - Remove [2x]
- Disconnect the electrical connector.
- Radio Front Center Speaker (2) - Remove
Instrument Panel Upper Trim Pad Bolt (1) - Remove [5x]
- Using a flat - bladed plastic trim tool, release the retaining clips.
- Instrument Panel Instrument Cluster Hood (2) - Remove
{ If equipped } Forward Collision Alert Display Bolt (1) - Remove [2x]
- { If equipped } Forward Collision Alert Display (2) - Remove
- Front Floor Console (1) - Remove - Front Floor Console Removal and Installation
Radio Control Bolt (1) - Remove [4x]
- Radio Control (2) - Remove
- Disconnect the electrical connector.
Instrument Panel Upper Trim Panel Bolt (1) - Remove [10x]
- Using a flat - bladed plastic trim tool, release the retaining clips.
- Instrument Panel Upper Trim Panel Bracket (2) - Remove
Using a flat - bladed plastic trim tool, release the retaining clips.
- Instrument Panel Trim Pad - Left Side (1) - Remove
Using a flat - bladed plastic trim tool, release the retaining clips.
- Instrument Panel Trim Plate Applique - Left Side (1) - Remove
Using a flat - bladed plastic trim tool, release the retaining clips.
- Instrument Panel Center Trim Pad (1) - Remove
Using a flat - bladed plastic trim tool, release the retaining clips.
- Instrument Panel Trim Plate Applique - Right Side (1) - Remove
- Disconnect the electrical connectors.
Instrument Cluster Bolt (1) - Remove [2x]
- Release the clips with a suitable tool.
- Disconnect the electrical connector.
- Instrument Panel Cluster Control Module (2) - Remove
Instrument Panel Cluster Trim Plate Bolt (1) - Remove [4x]
- Using a flat - bladed plastic trim tool, release the retaining clips.
- Instrument Panel Cluster Trim Plate (2) - Remove
Using a small plastic trim tool, separate the instrument panel steering column upper trim cover (1) from the instrument panel steering column lower trim cover.
- Disconnect the electrical connector.