Removal Procedure
- Extend the steering column to its furthest point to allow the instrument panel steering column upper trim cover to clear the instrument panel.
Using a small plastic trim tool, separate the instrument panel steering column upper trim cover (1) from the instrument panel steering column lower trim cover.
- Instrument Panel Steering Column Upper Trim Cover (1) - Reposition
Turn the steering wheel approximately 90 degrees to the right of the centered position.
- Instrument Panel Steering Column Lower Trim Cover Bolt (1) - Remove
Turn the steering wheel approximately 90 degrees to the left of the centered position.
- Instrument Panel Steering Column Lower Trim Cover Bolt (1) - Remove
Turn the steering wheel to the centered position.
- Instrument Panel Steering Column Lower Trim Cover Bolt (1) - Remove
- { If equipped } Disconnect the electrical connector.
- Instrument Panel Steering Column Lower Trim Cover (2) - Remove
Using a suitable plastic trim tool, release the retaining tabs.
- { If equipped } Steering Column Tilt Wheel and Telescope Switch (1) @ Instrument Panel Steering Column Lower Trim Cover - Remove