Installation Procedure

CAUTION:

Instrument Panel Knee Bolster Bolt (1) - Install and tighten [3x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Hood Primary Latch Release Cable Handle (3) - Install
Data Link Connector (2) - Install
Data Link Connector Bolt (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Trim Panel Insulator - Left Side (2) - Install
Instrument Panel Lower Trim Panel Insulator Retainer (1) - Install [3x]
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Outer Trim Cover - Left Side (1) - Install