Removal Procedure
Radio Front Center Speaker Grille (1) - Remove
Radio Front Center Speaker Bolt (1) - Remove [2x]
- Disconnect the electrical connector.
- Radio Front Center Speaker (2) - Remove
Instrument Panel Upper Trim Pad Bolt (1) - Remove [5x]
- Using a flat - bladed plastic trim tool, release the retaining clips.
- Instrument Panel Instrument Cluster Hood (2) - Remove
- { If equipped } Disconnect the electrical connector.
{ If equipped } Forward Collision Alert Display Bolt (1) - Remove [2x]
- { If equipped } Forward Collision Alert Display (2) - Remove