LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2024 >> Acadia AT4 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel Trim And Console Trim >> Repair Instructions >> Instrument Panel Extension Replacement >> Removal Procedure

Removal Procedure

  1. Disable the SIR system. SIR Disabling and Enabling
  2. GM6465288Courtesy of GENERAL MOTORS COMPANY

    Pull the windshield garnish molding (1) rearwards to release the tether from the A pillar.

    3. NOTE:

    Tether and Bolt are integral to the Windshield Garnish Molding.

  3. Access the windshield garnish bolt (2) which is located on the backside of the windshield garnish molding (1) and secures the tether to the A pillar.
  4. Windshield Garnish Molding Bolt (2) - Remove
  5. Disconnect the electrical connector.
  6. Windshield Garnish Molding (1) - Remove
  7. GM6457488Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Release the clips with a suitable tool.

  8. Radio Front Speaker Grille (1) - Remove
  9. GM6467054Courtesy of GENERAL MOTORS COMPANY

    Using a flat - bladed plastic trim tool, release the retaining clips.

  10. Instrument Panel Extension (1) - Remove
  11. Disconnect the electrical connector
scientia non olet · About LEMON Manuals