LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2024 >> Acadia AT4 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel Trim And Console Trim >> Repair Instructions >> Instrument Panel Cluster Trim Plate Replacement >> Removal Procedure

Removal Procedure

  1. Radio Front Center Speaker Grille (1) - Remove
  2. GM6455252Courtesy of GENERAL MOTORS COMPANY

    Radio Front Center Speaker Bolt (1) - Remove [2x]

  3. Disconnect the electrical connector.
  4. Radio Front Center Speaker (2) - Remove
  5. GM6467055Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Upper Trim Pad Bolt (1) - Remove [5x]

  6. Using a flat - bladed plastic trim tool, release the retaining clips.
  7. Instrument Panel Instrument Cluster Hood (2) - Remove
  8. { If equipped } Disconnect the electrical connector.
  9. GM6467024Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console (1) - Remove - Front Floor Console Removal and Installation 

  10. GM6463571Courtesy of GENERAL MOTORS COMPANY

    Radio Control Bolt (1) - Remove [4x]

  11. Radio Control (2) - Remove
  12. Disconnect the electrical connector.
  13. GM6467087Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Upper Trim Panel Bolt (1) - Remove [10x]

  14. Using a flat - bladed plastic trim tool, release the retaining clips.
  15. Instrument Panel Upper Trim Panel Bracket (2) - Remove
  16. GM6467083Courtesy of GENERAL MOTORS COMPANY

    Using a flat - bladed plastic trim tool, release the retaining clips.

  17. Instrument Panel Trim Pad - Left Side (1) - Remove
  18. GM6467085Courtesy of GENERAL MOTORS COMPANY

    Using a flat - bladed plastic trim tool, release the retaining clips.

  19. Instrument Panel Trim Plate Applique - Left Side (1) - Remove
  20. GM6467084Courtesy of GENERAL MOTORS COMPANY

    Using a flat - bladed plastic trim tool, release the retaining clips.

  21. Instrument Panel Center Trim Pad (1) - Remove
  22. GM6467086Courtesy of GENERAL MOTORS COMPANY

    Using a flat - bladed plastic trim tool, release the retaining clips.

  23. Instrument Panel Trim Plate Applique - Right Side (1) - Remove
  24. Disconnect the electrical connectors.
  25. GM6455254Courtesy of GENERAL MOTORS COMPANY

    Instrument Cluster Bolt (1) - Remove [2x]

  26. Release the clips with a suitable tool.
  27. Disconnect the electrical connector.
  28. Instrument Panel Cluster Control Module (2) - Remove
  29. GM6467067Courtesy of GENERAL MOTORS COMPANY

    Using a flat - bladed plastic trim tool, release the retaining clips.

  30. Instrument Panel Outer Trim Cover - Left Side (1) - Remove
  31. GM6467036Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Air Outlet Bezel Bolt (1) - Remove [4x]

  32. Instrument Panel Air Outlet Bezel - Left Side (2) - Remove
  33. GM6467044Courtesy of GENERAL MOTORS COMPANY

    Unclip the instrument panel steering column upper trim cover from the instrument panel steering column lower trim cover.

  34. Instrument Panel Cluster Trim Plate Bolt (1) - Remove [4x]
  35. Using a flat - bladed plastic trim tool, release the retaining clips.
  36. Instrument Panel Cluster Trim Plate (2) - Remove