Installation Procedure
Instrument Panel Center Trim Pad (1) - Install
Instrument Panel Upper Trim Panel Bracket (2) - Install
- Instrument Panel Upper Trim Panel Bolt (1) - Install and tighten [10x] - Fastener Specifications
Connect the electrical connector.
- Radio Control (2) - Install
- Radio Control Bolt (1) - Install and tighten [4x] - Fastener Specifications
- Front Floor Console - Install - Front Floor Console Removal and Installation
{ If equipped } Connect the electrical connector.
- Instrument Panel Instrument Cluster Hood (2) - Install
- Instrument Panel Upper Trim Pad Bolt (1) - Install and tighten [5x] - Fastener Specifications
Connect the electrical connector.
- Radio Front Center Speaker (2) - Install
- Radio Front Center Speaker Bolt (1) - Install and tighten [2x] - Fastener Specifications
Radio Front Center Speaker Grille (1) - Install
CAUTION:
Refer to Fastener Caution