Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Using a flat - bladed plastic trim tool, release the retaining clips.
Instrument Panel Outer Trim Cover - Right Side (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Radio Front Center Speaker Grille (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Radio Front Center Speaker Bolt (1) - Remove [2x]
Disconnect the electrical connector.
Radio Front Center Speaker (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Upper Trim Pad Bolt (1) - Remove [5x]
Using a flat - bladed plastic trim tool, release the retaining clips.
Instrument Panel Instrument Cluster Hood (2) - Remove
{ If equipped } Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console (1) - Remove - Front Floor Console Removal and Installation
Courtesy of GENERAL MOTORS COMPANY

Radio Control Bolt (1) - Remove [4x]
Radio Control (2) - Remove
Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Upper Trim Panel Bolt (1) - Remove [10x]
Using a flat - bladed plastic trim tool, release the retaining clips.
Instrument Panel Upper Trim Panel Bracket (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat - bladed plastic trim tool, release the retaining clips.
Instrument Panel Center Trim Pad (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat - bladed plastic trim tool, release the retaining clips.
Instrument Panel Trim Plate Applique - Right Side (1) - Remove
Disconnect the electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Air Outlet Bezel Bolt (1) - Remove [4x]
Instrument Panel Air Outlet Bezel - Right Side (2) - Remove