Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Front Floor Console (1) - Remove - Front Floor Console Removal and Installation
Courtesy of GENERAL MOTORS COMPANY

Using a flat - bladed plastic trim tool, release the retaining clips.
Disconnect the electrical connector.
Front Floor Console Rear Trim Panel (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Rear Console Trim Plate Bolt (1) - Remove [2x]
Using a flat - bladed plastic trim tool, release the retaining clips.
Front Floor Rear Console Trim Plate (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Front Floor Rear Console Side Trim Panel Bolt (1) - Remove [4x]
Using a flat - bladed plastic trim tool, release the retaining clips.
Front Floor Rear Console Side Trim Panel (2) - Remove