Removal Procedure

Front Floor Console (1) - Remove - Front Floor Console Removal and Installation
Courtesy of GENERAL MOTORS COMPANY

Open the front floor console armrest (1).
Courtesy of GENERAL MOTORS COMPANY

Using a flat - bladed plastic trim tool, release the retaining clips.
Front Floor Console Trim Plate (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Front Compartment Bolt. (1) - Remove [4x]
Using a flat - bladed plastic trim tool, release the retaining clips.
Front Floor Console Front Compartment. (2) - Remove
Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

{ If equipped } Front Floor Console Front Compartment Bolt. (1) - Remove [4x]
{ If equipped } Using a flat - bladed plastic trim tool, release the retaining clips.
{ If equipped } Front Floor Console Front Compartment. (2) - Remove
{ If equipped } Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Compartment Trim Plate Bolt. (1) - Remove [4x]
Using a flat - bladed plastic trim tool, release the retaining clips.
Disconnect the electrical connectors and release the wiring harness retainers as necessary.
Front Floor Console Compartment Trim Plate (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Cup Holder Liner (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Auxiliary Cooling Intermediate Duct Retainer (1) - Remove
Front Floor Console Auxiliary Cooling Intermediate Duct (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Depress the tab to release the low frequency console number 2 antenna (1) from the front floor console.
Low Frequency Console Number 2 Antenna (1) - Remove
Disconnect the electrical connector.