Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Front Floor Console (1) - Remove - Front Floor Console Removal and Installation
Courtesy of GENERAL MOTORS COMPANY

Using a flat - bladed plastic trim tool, release the retaining clips.
Disconnect the electrical connector.
Front Floor Console Rear Trim Panel (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Rear Console Trim Plate Bolt (1) - Remove [2x]
Using a flat - bladed plastic trim tool, release the retaining clips.
Front Floor Rear Console Trim Plate (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Front Floor Rear Console Side Trim Panel Bolt (1) - Remove [4x]
Using a flat - bladed plastic trim tool, release the retaining clips.
Front Floor Rear Console Side Trim Panel (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat - bladed plastic trim tool, release the retaining clips.
Courtesy of GENERAL MOTORS COMPANY

Remove the front floor console armrest insulator (1).
Inspect the front floor console armrest hinge springs (2) and transfer if they are not damaged.
Front Floor Console Armrest (3) - Remove