Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Install the front floor console armrest hinge springs (2) and the front floor console armrest insulator (1).
Install the front floor console armrest (3) to the front floor console armrest assembly.
Courtesy of GENERAL MOTORS COMPANY

Using a flat - bladed plastic trim tool, release the retaining clips.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Front Floor Rear Console Side Trim Panel (2) Install

CAUTION:

Front Floor Rear Console Side Trim Panel Bolt (1) - Install and tighten [4x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Front Floor Rear Console Trim Plate - Install
Front Floor Rear Console Trim Plate Bolt (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector.
Front Floor Console Rear Trim Panel (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console (1) - Install - Front Floor Console Removal and Installation