Automatic Transmission Fluid Pump Cover Assemble
WARNING: This page is about a different car, the 2023 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Callouts in the following chart represent components shown in graphic above.
Automatic Transmission Fluid Pump Cover Assemble
| Callout | Component Name |
|---|---|
| 1 | Automatic Transmission Fluid Pump Seal |
| 2 | Automatic Transmission Fluid Pump Pressure Plate Seal Procedure Install a NEW seal. Do NOT reuse the old seal.
NOTE:
The 1st and 2nd design automatic transmission fluid pump pressure plate seals are not interchangeable. |
| 3 | Automatic Transmission Fluid Pump Gasket Procedure Install NEW gaskets. Do NOT reuse old gaskets. |
| 4 | Automatic Transmission Fluid Pump |
| 5 | Automatic Transmission Fluid Pump Cover Bolt [5x]
CAUTION:
Refer to Fastener Caution . Tighten 10 N.m (89 lb in) |