Turbine Shaft, Reluctor Wheel and Piston Removal
WARNING: This page is about a different car, the 2023 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Callouts in the following chart represent components shown in graphic above.
Turbine Shaft, Reluctor Wheel and Piston Removal
| Callout | Component Name |
|---|---|
| 1 | Turbine Shaft Retaining Ring Procedure Remove and DISCARD the retainer ring. It is not re-usable. Special Tools GE 5586-A Snap Ring Pliers or equivalent Equivalent regional tools:Special Tools |
| 2 | Turbine Shaft |
| 3 | Reaction Carrier Hub |
| 4 | Reaction Carrier Hub Thrust Bearing |