Installation Procedure
Instrument Panel Radio Front Trim Plate (1) - Install
- CAUTION:
Refer to Fastener Caution .
Radio Control Bolt (1) - Install and tighten [7x] 2.5 N.m (22 lb in)
Connect the electrical connectors.
- Radio Control Assembly (1) - Install
Radio Control Bolt (1) - Install and tighten [7x] 2.5 N.m (22 lb in)
Instrument Panel Trim Pad - Right Side (1) - Install - Instrument Panel Trim Pad Replacement - Right Side (Terrain)
Instrument Panel Center Trim Plate Applique (1, 2) - Install - Instrument Panel Center Trim Plate Applique Replacement (Terrain)