Removal Procedure
Remove driver and passenger seat (2). Front Seat Removal and Installation
Front Floor Console Trim Plate (1) - Remove - Front Floor Console Trim Plate Replacement (Equinox)
Front Floor Console Applique (1) - Remove - Front Floor Console Applique Replacement (Equinox)
Front Floor Console Extension Panel - Right Side (1) - Remove - Front Floor Console Extension Panel Replacement - Right Side (Equinox)
Front Floor Console Extension Panel - Left Side (1) - Remove - Front Floor Console Extension Panel Replacement - Left Side (Equinox)
Front Floor Console Bolt (1)@Instrument Panel - Remove [2x]
Front Floor Console Bolt (1)@Automatic Transmission Control - Remove [2x]
Front Floor Console Bolt Access Hole Cover (1) - Remove
- Use a flat bladed plastic trim tool.
- Front Floor Console Bolt (2)@Front Floor Console Bracket - Remove
Front Floor Console Bolt (1)@Automatic Transmission Control - Remove [2x]
Front Floor Console Bolt Access Hole Cover (1) - Remove
- Use a flat bladed plastic trim tool.
- Front Floor Console Bolt (2)@Front Floor Console Bracket - Remove
With the aid of an assistant, remove the console from the vehicle. (1)
- Slide the front floor console assembly (1) back to clear the two guide pins.
- Disconnect the electrical connectors.
- Transfer components as necessary.