Disc Brake Component Specifications

Application	Specification
Application	Metric	English
Front Brakes
Rotor Discard Thickness*	38.5 mm	1.516 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Minimum Allowable Thickness After Refinish	39.0 mm	1.540 in
Rear Brakes
Rotor Discard Thickness*	18.5 mm	0.728 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Minimum Allowable Thickness After Refinish	19.0 mm	0.750 in
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications.