Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Front Trim Finish Compartment (2) - Remove - Front Trim Finish Compartment Replacement
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Use a flat bladed plastic trim tool.

Front Fender Ornamentation Vent Bolt (2) - Remove
Release the retainers.
Front Fender Ornamentation Vent (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using the appropriate trim tool, remove the windshield wiper arm finish caps (1) from the windshield wiper arms (3).
Windshield Wiper Arm Nut (2) - Remove [3x]
Using the appropriate tool, remove the windshield wiper arms (3).
Courtesy of GENERAL MOTORS COMPANY

Disconnect the windshield washer hose.
Air Inlet Grille Panel Retainer (1) - Remove [4x]
Air Inlet Grille Panel (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front End Sheet Metal Cross Panel Bolt (1) - Remove [4x]
Front End Sheet Metal Cross Brace Bracket (2) - Remove