Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Connect and position the wiring harness.
Instrument Panel Carrier (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Instrument Panel Carrier Bolt (1) - Install and tighten [3x] - Fastener Specifications
Instrument Panel Outer Air Outlet Duct Bolt (2) - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Carrier Bolt (1) - Install and tighten [17x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Ensure that the instrument panel wiring harness junction block retaining tabs are fully secured.

Position the instrument panel wiring harness junction block with wiring harness (3) and engage the 2 instrument panel wiring harness junction block retaining tabs (2).
Body Wiring Harness Bracket Bolt (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Auxiliary Cooling Duct Bolt (1) - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Clip the instrument panel steering column upper trim cover (1) to the instrument panel carrier.
Courtesy of GENERAL MOTORS COMPANY

Steering Column (1) - Install - Steering Column Removal and Installation
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Upper Trim Panel (1) - Install - Instrument Panel Upper Trim Panel Removal and Installation