Installation Procedure
Front Floor Console Center Compartment (2) - Install
- Front Floor Console Bolt (1) - Install and tighten [3x] - Fastener Specifications
USB 2 Port Receptacle (1) - Install
- Ensure that the retaining tabs are fully secured.
Install the Wireless Charging System Module Bracket (2) and Wireless Charging System Module (3) as an assembly.
- Wireless Charging System Module Bracket Bolt (1) - Install and tighten [x2] - Fastener Specifications
Front Floor Console Cup Holder (2) - Install
- Front Floor Console Bolt (1) - Install and tighten [4x] - Fastener Specifications
Connect the electrical connectors.
- Front Floor Console Cup Holder Trim Plate (1) - Install
Front Floor Console (1) - Install
- Connect the electrical connectors to the front floor console (1).
Front Floor Console Retainer Bolt (2) - Install and tighten [5x] - Fastener Specifications
- Front Floor Console Bolt Access Hole Cover (1) - Install
Front Floor Console Lower Applique (1) - Install
Front Floor Console Extension Panel (1) - Install
Front Floor Console Retainer Bolt (2) - Install and tighten [5x] - Fastener Specifications
- Front Floor Console Bolt Access Hole Cover (1) - Install
Rear Floor Mat (1) - Install
Tire Air Compressor (2) - Install
- Tire Repair Sealer and Tire Air Compressor Retainer (1) - Install and hand tighten
Front Floor Console Lower Applique (1) - Install
Front Floor Console Extension Panel (1) - Install
Front Floor Console Extension Bolt (2) - Install and tighten - Fastener Specifications
- Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Install
Install the left and right front floor mat (1).
- Return the seat to its original position.
Refer to Fastener Caution .