Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Tire Repair Sealer and Tire Air Compressor Retainer (1) - Remove
Tire Air Compressor (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Rear Floor Mat (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Move the front seat to access the retainers.

NOTE:

Use a flat bladed plastic trim tool.

Front Floor Console Bolt Access Hole Cover (1) - Remove
Front Floor Console Rear Cover Bolt (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Move the front seat to access the retainers.

NOTE:

Use a flat bladed plastic trim tool.

Front Floor Console Bolt Access Hole Cover (1) - Remove
Front Floor Console Rear Cover Bolt (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Open the armrest cover.
Release the retainers with a suitable plastic trim tool.
Front Floor Console Rear Trim Plate (1) - Remove
Front Floor Console Rear Cover Bolt (2) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Release the retainers with a suitable plastic trim tool.
Reposition the component to access the electrical connectors.
Disconnect the electrical connectors.
Front Floor Console Rear Trim Panel (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Rear Console Side Trim Panel (1) - Reposition
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Armrest Nut (1) - Remove
Front Floor Console Armrest Bolt (2) - Remove
Front Floor Console Armrest Dampener (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Rear Console Side Trim Panel (1) - Reposition
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Armrest Bolt (1) - Remove
Front Floor Console Armrest Nut (2) - Remove
Front Floor Console Armrest Dampener (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Armrest (1) - Remove