Intake Air Splash Shield Replacement

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts items in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedures Radiator Air Front Upper Baffle Replacement (LGX) Front Bumper Fascia Center Support Replacement - Upper
1	Intake Air Duct Bolt CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Intake Air Splash Shield Retainer [5x]
3	Intake Air Splash Shield