LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2023 >> Acadia SLE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 408 (Automatic Transmission - 9T50 (M3H), 9T60 (M3G) Or 9T65 (M3W) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Control Valve Body Assembly Installation (Without ETRS) >> Control Valve Body Ball Check Valve Installation

Control Valve Body Ball Check Valve Installation

WARNING: This page is about a different car, the 2021 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
GM4936702Courtesy of GENERAL MOTORS COMPANY
NOTE: Callouts in the following chart represent components shown in graphic above.
Control Valve Body Ball Check Valve Installation

Callout Component Name
1 Control Valve Body Ball Check Valve [5x]
Procedure 
Use DT-36850 - A  Transjel Lubricant for installing the control valve body ball check valves on-vehicle.
Special Tools 
DT-36850 - A  Transjel Lubricant
Equivalent regional tools: Special Tools