Sunroof Window Motor Replacement

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts items in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedure Roof Console Replacement
1	Sunroof Actuator Motor Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 5.4 N.m (48 lb in)
2	Sunroof Window Motor Procedure Disconnect the electrical connector. Perform the necessary initialization procedure. Sunroof/Sunshade Motor Initialization

Callout

Component Name

Sunroof Actuator Motor Bolt [2x]

CAUTION:

Tighten
5.4 N.m (48 lb in)

Sunroof Window Motor

Procedure

Disconnect the electrical connector.
Perform the necessary initialization procedure. Sunroof/Sunshade Motor Initialization