Conditions for Running the DTC

• DTC P281B, P281D, P281E = Not set
• { P2817 }Q77H Transmission Control Solenoid Valve 8=On
• { P2818 }Q77H Transmission Control Solenoid Valve 8=Off
• { P0741 }Q77J Transmission Control Solenoid Valve 9=On
• Accelerator Pedal Position=0 to 1%
• Battery Voltage=Greater than 9 V
• Engine Speed=Greater than 400 RPM
• Engine Torque=55 to 800 Nm (40 to 590 lb ft)
• High Side Driver 2=On
• Ignition=On
• Power Mode Status=Accessory or Ignition
• Transmission Fluid Temperature=7 to 130°C (20 to 266°F)
• Transmission Range P, R, N
• Vehicle Speed=3 to 9 km/h (2 to 6 MPH)

Frequency the DTC runs=Continuously - After the running conditions are met - For greater than 1 s