Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Brake Pedal Retainer (1) - Install NEW
Courtesy of GENERAL MOTORS COMPANY

Accelerator Pedal Position Sensor(1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Accelerator Pedal Position Sensor Bolt (1) - Install and tighten [ 2x ] 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Brake and Accelerator Pedal Assembly (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Brake Pedal Bolt (1) - Install and tighten [ 2x ] 22 N.m (16 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Brake Pedal Bolt (1) - Install and tighten 22 N.m (16 lb ft)
Reposition the wiring harness to the brake pedal bracket and secure the retainers.
Courtesy of GENERAL MOTORS COMPANY

Accelerator Pedal Position Sensor Electrical Connector (1) - Connect
Courtesy of GENERAL MOTORS COMPANY

Brake Pedal Bolt(1) - Install and tighten[3x]22 N.m (16 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Power Brake Booster(1) - Install - Power Brake Booster Replacement (Without MHG) Power Brake Booster Replacement (With MHG)
Courtesy of GENERAL MOTORS COMPANY

Steering Column(1) - Install - Steering Column Replacement (Equinox)Steering Column Replacement (Terrain)
Courtesy of GENERAL MOTORS COMPANY

Brake Pedal Position Sensor(1) - Install - Brake Pedal Position Sensor Replacement