Circuit/System Description

The head-up display is powered through battery voltage and ground.

The head-up display projects an image on the transparent screen and is only viewable from the driver seat. The image location and brightness is adjustable using the head-up display switch.

The head-up display switch is a multiplexed switch that controls the head-up display based on driver inputs. The head-up display provides the switch with a low reference and monitors a signal circuit. The head-up display switch is made up of a resistor ladder and three switches: Dim +/-, Up/Down, and Page. When a switch is pressed, the signal voltage is pulled low through the resistor ladder. When pressed, each of the switches will result in a different signal voltage seen by the head-up display, depending on the switch's location on the resistor ladder.