Instrument Cluster Replacement (Terrain)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Instrument Panel Cluster Trim Plate Replacement (Equinox)Instrument Panel Cluster Trim Plate Replacement (Terrain)
1	Instrument Cluster Bolt [ 4x ] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Instrument Cluster NOTE: The instrument cluster is programmed by a USB port located in the back of the cluster. Procedure Disconnect the electrical connector. If installing a NEW instrument cluster, program the cluster before installation. Control Module References

Callout

Component Name

Instrument Cluster Bolt [ 4x ]

CAUTION:

Tighten
2.5 N.m (22 lb in)

Instrument Cluster

NOTE:

The instrument cluster is programmed by a USB port located in the back of the cluster.

Procedure

Disconnect the electrical connector.
If installing a NEW instrument cluster, program the cluster before installation. Control Module References