Removal Procedure
Front Floor Console Transmission Shift Opening Bezel (1) - Remove - Front Floor Console Transmission Shift Opening Bezel Replacement (Terrain)
Electronic Transmission Shift Control Pushbutton (2) - Remove - Electronic Transmission Shift Control Pushbutton Replacement (Terrain)
Front Floor Console Extension Panel - Right Side (1) - Remove - Front Floor Console Extension Panel Replacement - Right Side (Equinox) Front Floor Console Extension Panel Replacement - Right Side (Terrain)
Front Floor Console Extension Panel - Left Side (1) - Remove - Front Floor Console Extension Panel Replacement - Left Side (Equinox) Front Floor Console Extension Panel Replacement - Left Side (Terrain)
Front Floor Console Bolt (1) @ Instrument Panel - Remove [ 2x ]
- Front Floor Console Retainer Bolt (2) @ Instrument Panel - Remove
Front Floor Side Stowage Compartment Liner (1) - Remove
- Front Floor Console Nut (2) - Remove
Reposition the driver and passenger seat forward to gain access to the front floor console bolt access hole cover (1) and the front floor console bolt (2).
- Front Floor Console Bolt Access Hole Cover (1) - Remove
- Use a flat bladed plastic trim tool.
- Front Floor Console Bolt (2) @ Front Floor Console Bracket - Remove
Front Floor Console Bolt (1) @ Instrument Panel - Remove [ 2x ]
- Front Floor Console Retainer Bolt (2) @ Instrument Panel - Remove
Front Floor Side Stowage Compartment Liner (1) - Remove
- Front Floor Console Nut (2) - Remove
Front Floor Console Bolt Access Hole Cover (1) - Remove
- Use a flat bladed plastic trim tool.
- Front Floor Console Bolt (2) @ Front Floor Console Bracket - Remove
Slide the front floor console assembly (1) back to clear the two guide pins.
- Disconnect the electrical connectors.
- With the aid of an assistant, remove the console from the vehicle. (1)
- Transfer components as necessary.