Conditions for Running the DTC

P0716 

• Accelerator Pedal Position=Greater than 5%
• Engine Torque= 30 to 8, 191 Nm (22 to 6, 041 lb ft)
• Power Mode Status=Run
• Transmission Input Speed=160 to 254 RPM

Frequency the DTC runs=Continuously - After the running conditions are met

P0717 

• Accelerator Pedal Position=Greater than 5%
• Brake Pedal Position Less than 70%
• Engine Torque 30 to 8, 191 Nm (22 to 6, 041 lb ft)
• Power Mode Status=Run
• Transmission Input Speed=Greater than 320 RPM

Frequency the DTC runs=Continuously - After the running conditions are met

P07BF, P07C0 

• Battery Voltage=Greater than 10 V
• Power Mode Status=Run
• Run/Crank Voltage=Greater than 10 V

Frequency the DTC runs=Continuously - After the running conditions are met