Control Valve Body Cover Installation
WARNING: This page is about a different car, the 2021 GMC Terrain. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Body Side Wiring Harness Opening Seal Procedure Install a NEW seal. Do NOT reuse the old seal. |
| 2 | Control Valve Body Cover Gasket Procedure Install a NEW gasket. Do NOT reuse the old gasket. |
| 3 | Control Valve Body Cover |
| 4 | Control Valve Body Cover Bolt [ 6x ]
CAUTION:
Refer to Fastener Caution . Tighten in sequence 11 N.m (8 lb-ft) |
| 5 | Control Valve Body Cover Stud [ 6x ] Tighten in sequence 11 N.m (8 lb-ft) |