Control Valve Solenoid Body Installation

WARNING: This page is about a different car, the 2021 GMC Terrain. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Control Valve Solenoid Body Bolts Tightening Sequence

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Control Valve Solenoid Body Procedure Ensure you disconnect all the connectors from the valve body. When servicing on-vehicle, the Variable Feed Solenoid Clutch Accumulator Pistons, and Springs may fall out. Control Valve Body Assembly Disassemble (with ETRS)
2	Control Valve Body Bolt [ 3x ] Procedure Hand tighten and follow torque sequence below.
3	Control Valve Body Bolt [ 12x ] Procedure Hand tighten and follow torque sequence below.
4	Control Valve Body Bolt [ 5x ] or [ 6x ] NOTE: Control valve body bolt quantity is wiring harness dependent. Procedure Hand tighten and follow torque sequence below.