Automatic Transmission Range Selector Lever Cable Lever Replacement
WARNING: This page is about a different car, the 2021 GMC Terrain. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the range selector lever cable from the range selector lever cable lever and the range selector lever cable bracket. Range Selector Lever Cable Adjustment |
|
| 1 | Automatic Transmission Range Selector Lever Nut
WARNING:
Hold the transmission range selector lever while removing or installing the lever retaining nut. Failure to hold the lever can cause damage to the transmission internal park system components which could allow the vehicle to roll when placed in the park position.
CAUTION:
Tighten 30 N.m (22 lb-ft) |
| 2 | Range Selector Lever Cable Lever Procedure
WARNING:
Ensure that the cable is properly aligned to the transmission bracket prior to tightening the fastener in order to avoid any damage to the cable and/or bracket. Failure to perform this task can result in the shifter moving out of the Park position unintentionally, causing potential vehicle damage and bodily injury. After installing the range selector lever cable, perform a range selector lever cable adjustment. Range Selector Lever Cable Adjustment |